xmsstamper  1.0
Public Member Functions | List of all members
XmStampIntermediateTests Class Reference

Tests the XmStampEndCap class. More...

#include <XmStampTests.t.h>

Inheritance diagram for XmStampIntermediateTests:

Public Member Functions

void test_WingWall01 ()
 Tests stamp operation.
 
void test_WingWall02 ()
 Tests stamp operation.
 
void test_WingWall03 ()
 Tests stamp operation.
 
void test_wingWall04_cut ()
 Tests stamp operation. Tests a cut stamp.
 
void test_SlopedAbutment01 ()
 Tests stamp operation.
 
void test_SlopedAbutment02 ()
 Tests stamp operation.
 
void test_SlopedAbutment03 ()
 Tests stamp operation.
 
void test_SlopedAbutment04_cut ()
 Tests stamp operation.
 
void test_SelfIntersect ()
 Tests stamp operation.
 
void test_GuideBank01 ()
 Tests stamp operation.
 
void test_GuideBank02 ()
 Tests stamp operation.
 
void test_GuideBank03 ()
 Tests stamp operation.
 
void test_GuideBank04 ()
 Tests stamp operation.
 
void test_GuideBank05 ()
 Tests stamp operation.
 
void test_GuideBank06 ()
 Tests stamp operation.
 
void test_GuideBank07 ()
 Tests stamp operation. angle on the guidebank end cap.
 
void test_GuideBank08_cut ()
 Tests stamp operation.
 
void test_IntersectBathymetry01 ()
 Tests stamp operation. Intersection between shoulder and outer edge of a cross section.
 
void test_IntersectBathymetry02 ()
 Tests stamp operation. Intersection between center line and shoulder.
 
void test_IntersectBathymetry03 ()
 Tests stamp operation. Intersection between center line and shoulder with a more complex cross section.
 
void test_IntersectBathymetry04 ()
 Tests stamp operation. Center line intersects bathymetry.
 
void test_IntersectBathymetry05 ()
 Tests stamp operation. Center line intersects bathymetry twice.
 
void test_IntersectBathymetry06 ()
 Tests stamp operation. Both end caps are sloped abutments and they intersect the bathymetry.
 
void test_IntersectBathymetry07 ()
 Tests stamp operation. Intersection with guidebank centerline. Cuts off the guidebank so no guidebank is stamped.
 
void test_IntersectBathymetry08 ()
 Tests stamp operation. Intersection with guidebank centerline. Cuts off the guidebank partially down the guidebank centerline.
 
void test_IntersectBathymetry09 ()
 Tests stamp operation. Intersection with guidebank cross section beyond the shoulder.
 
void test_IntersectBathymetry10 ()
 Tests stamp operation. Intersection with guidebank centerline. Cuts off the guidebank right before the end.
 
void test_BuildRasterAndGetCellValue ()
 Tests building a stamping raster and getting a cell value.
 

Detailed Description

Tests the XmStampEndCap class.

Definition at line 23 of file XmStampTests.t.h.

The documentation for this class was generated from the following files: